Ian

Alternative implementation would be to add the SMARTBEACON settings to the TBEACON configuration line for each channel

> Hi, @VK1IAN any chance you are using Debian 11? Ubuntu 20.04 (in a VirtualBox VM)

@zuckschwerdt Thanks mate. Couple of questions: - How did you come to the values for s, l and r?? (i.e in the command s=50,l=50,r=900) - Is 250K sample rate sufficient...

Been doing a bit of experimenting (more to familiarize myself with the tools) and seem to have found a discrepancy. If I run the attached cu8 file through rtl_433 using...

> rtl_433 will automatically find a preamble (`aaaaa`) and adjust the bit rate to perfectly match. Pulseviewer doesn't do that, so you'll need to match the rate yourself -- 60...

Been playing with BitBench and think I'm sorted for the most part, however I don't seem to be able to figure out what the variables in the "Calculation" section do;...

OK. To reinforce my understanding, if I have the following: `aaa167f29cde456aaaaa` and I only want to sum the `167f29cde456` section to a byte value, I would use Offset: 12, Length:...

Ack

Turns out the captured data I provided previously is not the Mobiletron TPMS. I positioned myself in a remote area of my mate's property (no power available) so I could...

> TPMS usually use PCM with MC, i.e. there is data in the gaps which PWM would disregard. For raw data use > > ``` > rtl_433 -R 0 -X...