Unexpected Maker

> After the guru meditation error, do you get a backtrace line with lots of addresses? That would be helpful. > I just built from master and the crash location...

If I set DEBUG=1 when I call make, I get no panic, but it also doesn't work. No web page is served. If I rebuild without DEBUG=1, it panics again....

Ok, well I can't seem to get a backtrace at all. Just did the loop again, with no DEBUG=1, I get that panic, but no call stack. With DEBUG=1, I...

Hi @dpgeorge - I've not tried all of those combinations, as I only need DNS for when I am using the AP, and all of my projects are now on...

Reflow Master only supports the ATSAMD21G18A - in the QFP package. Anything else will require you to modify the PCB design (if you go for a QFN package of the...

It's in stock at mouser... though not many. https://au.mouser.com/ProductDetail/Microchip-Technology-Atmel/ATSAMD21G18A-AUT?qs=sGAEpiMZZMtXHE36kCvv36ajhsTJC%252B%2FBgmvnKz0leZ0%3D You only need 1 right?

Sure, using a doner chip from another board is fine, so long as you have the tools and skills to remove it and re-solder without killing it.

> Actually it would be nice to make it 1mm thicker and on top of that it will work with 6805-ZZ bearing which is math cheaper on Amazon but 1mm...

Ok, so you can buy the cheaper one and modify the STL file to suit. Or you can buy the bearings from Aliexpress and pay 1/3 of the price. Either...

Oh hey, this is awesome! But it seems we've clashed :) I have a v1.09 that already has a bunch of what you have listed implemented... not all though and...