Traumflug

Clearly a Repetier bug :-)

While this is Repetier just wasting bandwidth, it might be safe to simply ignore carriage returns nowadays. MacOS and partially Mac OS X used to use carriage returns only, so...

If Repetier breaks prints due to stray "ok"s, it's a Repetier bug. Please report it there or use a non-broken host like Pronterface. It's not the duty of a firmware...

If you follow the thermistortable branch, you can see that I implemented the logarithm algorithm used in the HP-35 pocket calculator. Remember this one? It was the first pocket calculator...

OK, I'm back in the vincinity of a table lookup when doing direct calculation: ``` LED on time minimum: 1646 clock cycles, LED on time maximum: 2714 clock cycles, LED...

Now that we have auto-generated thermistor tables this issue here certainly needs much less a solution. But the last few days/weeks I built the [ISTAtrol](http://reprap-diy.com/istatrol), which uses thermistors, too, but...

... which is exactly the same for x = 8, except that `x * old_smooth` isn't stored for re-use. _shake hands_

Yes, exactly. Still it mostly acts as sensitivtiy, because this prediction into the future is a straight vector. The longer this vector is, the more likely the prediction leaves the...

These 1-bit-jumps mean to "jump" applied heater power, not the temperature reading. Also suggested above is to not control Celsius readings, but raw ADC readings. This removes the need to...

Nice! While the ZIP file is from yesterday, I unpackaged it into my Teacup sources and found it to be based on a very old version of Teacup. Definitely from...