Augusto

problem with baro INAV 5.0.0 - target MAMBAF405US_I2C

6

Same problem has been probably already issued, I attach here my description and data. Model already flown 3-4 times. I had already noticed a minor problem with altitude. This time...

Quad works well if SBUS FCB-RX comms are used but it does not reliably work if FCB-RX comms use F-Port.

1

In particular: - using F-Port the connection between FCB and RX does not always work at startup. - even when by chance it works, shortly after the connection goes, and...

Kakute H743-Wing with INAV 7.0.0: ledstrip does not work

5

I have got a Holybro Kakute H743-Wing FCB and the problem I report is that I have never seen ON any led of the strip. Everything else I am testing...

The blackbox tab contains configuration information, notably the blackbox logging device, that, if wrongly set, can block the access to the tab itself. The way to come out from this...

Motors stopped in NAV ALTHOLD + SURFACE mode

6

The quad fell from the sky, two times. Fw Version: INAV/MATEKF722SE 7.1.2 Quad FW: - Matek System Optical Flow Lidar Sensor 3901-L0X Module - Baro_hardware DPS310 Quad has flown (well)...

erratic altitude from GPS ?!

4

Last Friday 2025 October 10, I went to the usual country side, to fly the (usual) wing. I flew in manual mode and everything was normal. Only at home, looking...

Quad comes down regardless of throttle in altitude hold

1

I was in altitude hold when the quad came down to land, fortunately slowly enough, totally ignoring the throttle. I do think that this issue looks like a repetition of...