Tom

Wish this was clear in the documentation! Does not work on Android/IOS at all

hmmm I've having a similar problem with 4021 pull downs. I originally set up the shift registers with freejoy and they were working as expected, then had to move my...

see this firmware in my issue, it might solve your problem (and the change hopefully will be folded into a new version of freejoy) https://github.com/FreeJoy-Team/FreeJoy/issues/222

Just tried a clean windows 10 install, exact same system lockup behaviour, Tested the same azure kinects on different PC hardware (a laptop and a ryzen desktop) and confirm the...

What only can be described as an extremely stupid solution through throwing shit at the wall: using cablematters 3.0 extensions (20 feet) the lockup doesn't appear to occur. I guess...

I think I am encountering a similar issue https://github.com/microsoft/Azure-Kinect-Sensor-SDK/issues/1950 edit: I have a really stupid work around I discovered just for a laugh running the sensors each through a usb...

What worked for me was to connect the sensors with USB 3.0 extensions or use a 3.0 hub that downgraded the connection to the NUC.

You have a fake bluepill

You can use them to directly wire a usb cable (if you also connect gnd and 5v) and then not use the usb connector on the board (if say you...

Likely a fake bluepill