Tomáš Jozífek

Hi, yea, this seems confusing. We have a way to display a printer's name there, but the task must have flown under the radar. We should fix this eventually. Just...

Started to use the dropdowns as edit boxes. Unscrollable

I had my raspi soldered poorly. Printer did the same thing. If you want to be sure this is a hardware issue, send me please the syslog file from the...

Are you willing to check whether this is a hardware issue? (send the log, confirm you are using the pi on the einsy pins, jiggle it a bit to see...

I am going to transfer this to Prusa-Firmware-Buddy as this looks like a Buddy printer, not an MK2.5/S or MK3/S/+ one

Huh, never tried this, you seem to be doing funny stuff with the address bar. Anyway, moved the issue to Prusa-Link-Web as I think the (faulty?) code is here

Hi, sorry, there's no temp monitoring for the pi. You'd have to set up that yourself. However, I use checksums for the print gcode. Not sure if the pi produces...

Yea, you can use ssh to log into the raspi. Setup is the same as with usual raspi os. either you enable SSH in the imager, or you enable it...

I guess you have one of the newer printers. Mini, MK4, XL. Support for them is coming, but no word on when. You won't be able to send commands directly,...

Hi, Raspi 5 is not supported, the base image for 0.7.2 has been created with the old base rpi image. 0.8.0 is on the new base but I need to...