Timeline8

I opened a post in the forums for this same issue, not realizing this was already reported. My post with details is here https://forums.adafruit.com/viewtopic.php?p=1039724 but the short version is Qt...

@brentru, Thanks I will give it a try and report back. I did another test today with a different smaller battery and the same result. 3 for 3 losing the...

New information. Short version is it would seem there is something wrong with the beta.83 (latest as of this writing) version of WipperSnapper. Today I received my backordered S3 REV...

I should have mentioned in my original posts that in every case I both pushed the reset and disconnected/reconnected the USB in attempts to get the WIPPER drive to show...

Ummm, Sonoma is 14. OS 15 (Sequoia) was just announced literally 4 days ago. Perhaps you were thinking of a different earlier OS? And as I stated in my previous...

Yes, I was aware of the Sonoma issue but thought that was (sort of) fixed on the latest Sonoma update. Maybe I misunderstood that. But the weird thing is when...

Note that the NeoPixel shows the “wippersnapper lime” color when it should be showing the WIPPER drive, so assume below anywhere I say **WIPPER** drive the NeoPixel is indicating the...

One more test... Downloaded previous version **wippersnapper.feather_esp32s3_reverse_tft.1.0.0-beta.82.uf2** Installed on same board (S3 Rev TFT). **WIPPER** appeared. Did **not** run the shell script this time. Rebooted the board three times by...

You are welcome for whatever bit of help I was able to provide. I went to load wippesnapper because a question on the Adafruit IO forum prompted me to see...

Thank you. But to note again, I found this problem on the 3 different model boards I tried. The S3 Rev TFT feather was simply the last one I tried...