Thomsus

Hi, I have had the same issue for some time now. I tried replacing the serial to usb device, but the issue continues. Previously it only occurred once in a...

Hi Motoz. Pellmon works, as it shows the graphs, updates the vector image, sends mails etc. But I get a lot of timeouts. 

I tried to make the story short, but understand why you ask for more :-) I had an old raspberry pi with Pellmon running for a few years, that suffered...

@Motoz: The reboot made Pellmon work fine for months (no timeouts).

Anders, would you like me to start my own thread with my issue? I know I'm the one who interfered with jablab's issue, as it seemed similar to mine.

Hi Motoz. My Raspberry pi is running "Raspbian GNU/Linux 9 (stretch)" USB says: "Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port" Power supply you say? Well,...

Normal log? I wouldn't have guessed so. Anyway, I found this in the log: 2018-03-20 21:49:34,191 - INFO - Timeout again, give up and return fail 2018-03-20 21:49:44,207 - INFO...

I have checked the cable connections. All wires are tightly fitted in the terminals, on the print. My issue really exploded after re-installing the raspbian lite with pellmon. So I...