ThoDieX

Yes, had tried this several times but no success. Also not in the configuration file itself: root@SchlumpfNAS:~# sudo ethtool -s eth2 speed 2500 duplex full autoneg off Cannot set new...

With speed 1000 it is working. But speed 2500 is ignored ... maybe of this (but the current speed is 2500Mb) Link partner advertised link modes: 100baseT/Half 100baseT/Full 1000baseT/Full -------------------------------------------...

No, issue is still open. Reducing to 1GB is possible but setting to 2.5Gb will be refused from the system. Maybe the driver has a problem fetching the speed from...

I've checked with 2.15.0-5 and tested another adapter (_ASUS USB-C2500_) but it's the same. Starting up fine unless status is "booted" and the LED not not blinking anymore. The network...

Hej Sjekke, if the NAS tells you you have 2500Mb it's fine ... go to network in DSM and expand the network settings for your card., There you will see...

@bb-qq : I have connected the NAS with 2,5Gb to the AVM Repeater port and it works fine. So it must be a problem of the driver to negotiate the...

@bb-qq : I disagree with you. If this would be true, it has a problem during using it. But it is stable. If this is true it would have problems...

By the process of elimination that failure analysts use to narrow down a failure and perhaps my 30+ professional years in IT with some gut feeling!? Let's put it this...

All fine :-) ... it's just an "Sherlock Holmes" effect to figure it out ... I've ordered an different switch from Zyxel with 8x 2,5Gb and I will tell if...

So, Zyxel MG-108-ZZ0101F arrived and is working like charm now ... no problems anymore ... full 2.5Gb at all boot processes ...