Josh Campbell

Put your wireless card into monitor mode using: airmon-ng start [interface] Kill network manager with: airman-ng check kill wifite now starts and immediately begins scanning networks

I see the same issue occasionally on the Wemos D1 Mini. I have to re-flash then while holding down the reset button flash the power to the MAX then release...

I have run across the exact same problem. I'm running a MAX30102 on a DIYmall breakout board. http://a.co/d/d31zetS On an ESP8266 (AI-Thinker) - (Adafruit Feather Huzzah equivalent). All of the...

Thank you for this! I have a project that has five I2C peripherals and three of them don't work on with the current espressif32 platform (or any of the older...

Or a simple band selection such as that implemented in aircrack-ng i.e. airodump-ng wlan1mon --band a Thus only selecting 5GHz channels.

Using: "zod": "^3.22.4" I can reproduce a similar issue in SvelteKit where the only thing required to return valid is that the string begins with a letter followed by a...

Glad you are enjoying using it. I don't think I have seen a request for this yet but should not be too much work to wrap that. [JSON_CONTAINS](https://database.guide/json_contains-examples-in-mysql/)

Hey, I'm guessing this is MostafaM44. I posted a response on the Instructable: https://www.instructables.com/id/Low-Cost-DIY-Stepper-Motor-Laser-XY-Scanner-Cutter/

I was seeing too many of the same types of issues that HeadTek pointed out as well as I2C issues. I ended up moved away from the ESP32 for the...