Tony Olivo

Are you thinking something like using the numpad? Like 2, 4, 8, 6 are front, left, back and right? Maybe 5 is top, 0 is isometric (I've seen that elsewhere,...

Then OpenSCAD bindings don't seem very intuitive. It looks like they were just counting up through their menu. 

Different initializations of `size` gets different results. [0,0,1], [0,1,1] and similar - these result in "cube size should be non negative". This seems to be because of the lines [@x,@y,@r]...

@AxTheB, I'm interested in working on this. If I understand thingdoc correctly (and while I've installed it, I've never tried hard enough actually compile an example), comments would go in...

Maybe there could be some generic things, like "X axis idler bearing", and whether it gets selected as 624 or 608, it still gets counted, but then its on the...

Oh! It certainly looks like I didn't read far enough into it. From the text files in the bom directories, they looked meticulously hand generated. Maybe that should have tipped...

I've been looking at ThingDoc more. @AxTheB, I remember you saying on G+ that the tdoc stuff for this repo got out of date because there's no documentation on how...

Updated the README on ThingDoc so we can see what it does. https://github.com/Thav/ThingDoc

Got some skeleton ThingDoc definitions going in my fork. ``` Bill of Materials: Prusa i3 RepRap ++++++++++++++++++++++++++++++++++ Rods and Bars ============= - 1x Idler Vitamins ======== - 5x 608 skate...

Had the same problem, had to leave the bearing guide out of my build. It's not ideal since the belt is not centered on the bearing.