Ted-Printable
Ted-Printable
Hi, having the same issue. Running Marlin2.1.2.4 (Latest) on a BTT Octopus V1.1 (STM32F446ZE) with TMC2209 drivers. I have FOUR - Z-steppers, Z, Z2, Z3 and Z4. Homing works normal...
I also enabled the #debug_leveling feature as suggested and got the following report; Recv: X:350.0000 Y:150.0000 Z:20.0000 E:0.0000 Count A:28000B:12000 Z:4000 Recv: T:26.12 /0.00 B:23.23 /0.00 @:0 B@:0 Recv: X:350.0000...
A more detailed report. I had to grab the output in two moves, may have missed a few lines. Recv: echo:G91 Recv: ok P31 B63 Send: G28 Z0 Recv: echo:G28...
ellensp, thanks, I learned something, much obliged.
New Revelation...... I disabled //#define VALIDATE_HOMING_ENDSTOPS and redid the test. Results posted below, TOTAL SUCCESS. So the problem is with Homing Validating with multiple steppers and endstops on the axis....
Found the problem, but not the right solution. In file \Marlin\src\module\endstops.cpp on lines 453 to 459 is the statement that kills the printer if any endstop is not triggered. This...
Will, let you know shortly.....
Downloaded the latest bugfix, but same error again. Kill called after validating , the second home bump. I know this is not something widely used, but I am almost sure...
I already did that test as reported above, disabling VALIDATE_HOMING_ENDSTOPS, terminate normal and correct. Seems when the four steppers is perfectly alighned after the first bump that is the issue,...
Hi, I did the same test with the "S32" debug detail. In this instance I am running what truly reflects my machine, X, Y, Z, Z2, Z3 and Z4 with...