Target0815

In a LR configuration with tracker & co. it is easiest to use a wifi router as a central point. For this, DroneBrigde would only have to be able to...

Yes, I am sure ... It tries to connect via MAVFTP, but after a while the parameters are loaded individually. About 50% then comes more often "Already Got param ..."...

Download from this post: https://fpv-community.de/threads/matek-f411-wse-softserial.85747/post-1051752 (may be, that you have to be registered at the forum).

The combination of ArduPlane 4.1 DEV on a H743-Wing is definitely not ok ... I am currently building a plane with this combination. There are the following problems: The setup...

With a SpeedyBee F405 Wing I would also like to have a look at this. I would just need the right firmware for it ...

@andyp1per Can you please provide a firmware for SpeedyBee F405 Wing?

With Ethos 1.5.6  I still have to test whether the values are correct ...

Ethos can evaluate the frame CRSF_FRAMETYPE_BARO_ALTITUDE with ID9 (Alt and VSpd). EdgeTX only evaluates CRSF_FRAMETYPE_VARIO with ID7 (VSpd). It would be an advantage for Ardupilot if we could use both....

**EdgeTX 2.9.4** VSpd - ID7 - shows changing values between -25.x m/s to +50.x m/s without movement (incorrect) Alt - ID9 - constantly shows -586.5m (incorrect) for comparison Alt -...

[Andy_log.zip](https://github.com/ArduPilot/ardupilot/files/15139942/Andy_log.zip) Log 1: original 4.6.0 with ER8GV **Vario** RX Log 4: Andy 4.6.0 with Standard ELRS RX You should be able to make a good comparison.