TITAN3737

> Send $message/level=debug and give us the debug log from a homing failure I'm out of the workshop for today, will send the terminal log first thing in the morning...

$h [MSG:DBG: Homing Cycle Z] [MSG:DBG: Homing nextPhase FastApproach] [MSG:DBG: Starting from 300.000,200.000,0.000] [MSG:DBG: Planned move to 300.000,200.000,198.000 @ 2000.000] [MSG:DBG: Z Pos Limit 1] [MSG:DBG: Homing limited Z] [MSG:DBG:...

I just found out that this homing failures and random limit switches over travel only occur when connecting via Bluetooth. When connected by USB cable homing works fine. But cable...

Thank you for reply. I am trying to figure this out all day long, about 500 homing cycles later I found out that this really does have something to do...

I just donated 50$ to Honu Putters LLC/FluidNC. Maybe that can help with the development just a little. I understand that creating open source must be difficult challenge. Hope sometime...

Thank you for quick reply, I have tried setting auto-reporting to 50/100/500/5000 ms without any major difference. After a while the controller still resets. If I set the reporting to...

That is very unfortunate. Because I use a smartphone for the WebUI and I am sure that when I switch my screen off and on again, then Firefox will sometimes...

I do understand it is not easy and I appreciate your work on this free software. I try to make my machine work off a computer, even thou it is...

Thank you. I will try that as soon as possible and after testing, report my findings.

Sorry for the delay. I have uploaded the new index.html.gz and did many tests to try come up with some useful information. I had big trouble figuring out why sometime...