Nhan Nguyen

The black threshold doesn't change the outcome, and one thing I forgot to mention is that, when turning on "Enable sending" after uploading the ino code, the program doesn't change...

I think, it's defintiely something with the program, rather than the MCU we're using. I assumed that it was a serial communication problem, so I did some research, and found...

if you disable the "Enable sending" you can free up the port without have to exit the program. That's weird though, you're the tiles are showing proper colors but it's...

I take that back, I've purged all instances of adrilight from my computer and downloaded the newest version. The preview is working properly now, but the communication isn't working still....

Is the WIFI setting defined within the "Erase setting" of the tool's tab? D1 seems to work for uploading the lights, are you suggesting to use pin 5 instead?

That's the problem though, that's what fatsenet mentioned earlier, and that's what me and TheLilGrant is having problems with. The led are stuck even with matching count.

Yes, if you've read earlier post, I've attempted with lower baud rate than the suggested baud rate of 1 million. "I know that for this specific application, you're not suppose...