SimosTools
SimosTools copied to clipboard
Switchleg1
Tool to assist in tuning simos ECUs.
Hello, every time I open the app, I will be prompted to turn on Bluetooth. If I use OTG to link the vehicle, OTG connected will not be displayed. Want...
Hi, I made the clone and I was able to log basic data but when I switched the logging mode to 22 or 3E and go to the logging screen...
Isn’t the UDS service address for Read data by memory address 0x23 and not 0xE3? Or is 0xE3 a vag specific ID? Just asking out of general interest - this...
Hello. How can I create an additional exhaust gas temperature "sensor" and write it to log or change an existing but not important "sensor" to an egt sensor? What settings...
Мне удалось подключиться к simos 19.6 но там очень мало параметров и работает только в режиме mode1. Планируете ли вы добавить полноценную поддержку логирования simos 19.6 в режиме mode22, где...
In the chip firmware version 1.03 it already reads many parameters of simos 19.6, but not all!!! For example, there is no data on otkvtam. Where "0" there is no...