SwimGeek
SwimGeek
### Package version 1.0.20210606-2 ### Firmware version v2.0.9-hotfix.2 ### Device EdgeRouter X (SFP) - e50 ### Issue description Wireguard allows you to set the MTU to 1280. For IPv6 traffic,...
Hi Related to issue 99: Config fails at reboot #99 The problem seems to be that if you have IPv6 configuration items in the startup config.boot file, Wireguard gets into...
Hi. My Wireguard config on an ER-X works until I reboot the device. When it reboots the allowed-ips sections fall away. I think it's because the endpoint is not yet...
**Describe the bug** This is more of a feature suggestion than a bug report. I noticed 'Thread Starvation' warnings in FRR logs after updating BGP local-pref values. vtysh locks up...
FRR: 8.3.1 OS: Debian 11.5 Kernel: 5.10.140 --------------- **Describe the bug** - [ x ] Did you check if this is a duplicate issue? - [ ] Did you test...
**Description** Every time there is a new Salt release, I run a salt command to upgrade all my servers: salt '*' pkg.list_upgrades About 1/2 the servers fail to get back...
**Is your feature request related to a problem? Please describe.** I often use this command to see which servers need package upgrades: salt '*' pkg.list_upgrades But, this creates a very...
### Is your feature or enhancement related to a problem? Please describe. Hi Please add support for Telegram bots which have 'business mode' enabled. See discussion for context: https://github.com/orgs/chatwoot/discussions/9735 ###...
### Is your feature or enhancement related to a problem? Please describe. Hi When sending a transcript, there is an option for 'Send the transcript to another email address' -...
### Description I'd like to configure the hostname and domainname sent to BGP peers. Please see discussion: https://github.com/FRRouting/frr/discussions/16903 It seems that FRR needs to be able to use the output...