Jan
Jan
Since i don't use auto-z (yet), i can't give any info
I use tap and haven't had the issue with an overheated nozzle.
Could you please describe in which case it is over 150 degrees? (I mean steps done to have it over 150)
Could you add a klippy log until the start with the mesh? Can you also give an example gcode file which includes the 'misbehaviour'? (E.g. a voron cube at 300%...
hmm, reading your last comment again: You do a primeline and after that you do a bed mesh?
your order is wrong. mine does primeline right before the print start. QGL, Bedmesh comes always before that. can you please attach a klippy.log? your `startprint_actions` seems out of order...
hmm, i understand if someone with a Voron Taps wants to purge/clean nozzle before a bed mesh, But I don't see the reason to do it on an inductive probe....
please change order to HEATSOAK_BED HEATSOAK_CHAMBER TILTING EXTRUDER_HEATING PURGE CLEAN EXTRUDER_PREHEATING
putting primeline before extruder_heating won't work as the function does not have any temperature commands afais
you added no klippy log, just a link to this issue. if the print_start action is really as you describe, the print can never begin, since the extruder is at...