Suhayl

Hi @2bndy5 @TMRh20 , Thank you! I tried your suggestion. Here are the test results: > 1. use a normal write(). It doesn't work at all, but when I touch...

Hi, > 1. use a normal write(). Rf24 module is a brand-new module I purchased. And I tested several, and they all have the same performance.

Hi, No, all the above tests are on-board antennas. like this:  At the same time, I tested the PA/LNA type module and found that everything was normal. The `write`...

Hi, `radio.setAutoAck(true);` Like the code shown on the first floor, the functions in setup have not been changed. > 2. call txStandBy() after calling writeFast() > 3. flush the TX...

Hi, > Do you have a 10-100uF capacitor connected between the VCC and GND pins of the radio? If not you should try that. It has a 10 UF tantalum...

Hi, I tested the PA/LNA type modules yesterday. They worked very well, and the working conditions were the same. Only the modules were replaced in the same slot. Can this...

Hi, I found the above picture on the Internet. My module is like this. There are no characters on the shield.