Suggy50

The board designed by BOBRICIUS, PEMI.TECHNOLOGY Currently using ZxSpectrumPicomputerVga222Zx.uf2 and ZxSpectrumPicomputerZxLcd.uf2 Firmware

@fruit-bat fantastic, green light on the pico. If I have trouble in the future I know power is getting to the board and the issue is else were

@bobricius Very nice board but perhaps a small amplifier circuit for volume, im hard off earing and find it difficult with the volume on some games My bad found it...

@bobricius Do you have a part number for the speaker socket? I got my board ready built from Stephen Stuttard, and been hard off hearing the piezo speaker is too...

> > @bobricius Do you have a part number for the speaker socket? I got my board ready built from Stephen Stuttard, and been hard off hearing the piezo speaker...

> @Suggy50 I am use this https://www.tme.eu/sk/details/1503-20/konektory-jack/lumberg/1503-20/ Thanks Peter, have ordered some

Still no resolution to this problem Bigtreetech you need to fix this problem. A little more information. When setting up MCU host I try to install "sudo apt-get install gpiod"...

> Hey guys I'm in the same boat as you Have a manta m8p v1.1 with CB1 eMMC and i'm not able to connect to `gpio26` to control the fan....

Yes I did all this. I resolved the issue by putting the CB1eMMc in aPI4B adaptor and configuring the the BootEnv and system files, put the CB1eMMc back into the...

as per here https://github.com/bigtreetech/CB1/issues/112