Strobistar

#metoo however you actually do not need data from the VR91 as this is merely a "remote": all its configurations can be fetched (and updated) through the VR_700 which you...

>>> linkback to FHEM forum: [https://forum.fhem.de/index.php/topic,106137.0.html#ratethis](https://forum.fhem.de/index.php/topic,106137.0.html#ratethis)

Hi John, yes, copying the 06.pms.csv did something magically happen, I now have this: > vmd ASIDetected = 36 > vmd BufferControlDiff = ERR: invalid position in decode > vmd...

Hi @pagaille, I ran my ebusd scripts till Summer, discovered (with the help of a couple of DS18B20 sensors) that something was wrong with my glycol tubes, now waiting for...

Yes, glycol was pumped up top down, and never reached the temperature sensor at the opposite side. Hence that reading (in late afternoon) gave readings +50C°, glycol of 45°C was...

You got much more information than I had with mine (although plenty of errors), but your Ntc1Sensor and Ntc3Sensor report back values. Ntc1 is the roof sensor in the collector,...

Hi @pagaille that is great stuff, my ebus reader is currently offline, I'll sync your additions when back online! Thank you!

Hi @aguti2, Regarding wiring: the ebus is, as the word states, a bus. You have to connect each of the two wires with each other. On the same 2 wires,...

Well, to my understanding, an ecotec nor aurostep are very chatty. I haven't seen a single bit transferred between the two of them. I suspect that if you have a...

Hi @aguti2 ! I did once a git-clone towards my system: > git clone https://github.com/john30/ebusd-configuration.git > if [ -d /etc/ebusd ]; then sudo mv /etc/ebusd /etc/ebusd.old; fi > sudo ln...