Stevehans

I think that RSVP=FALSE needs to be TRUE to get the buttons to appear?

ems-esp:$ read 8 33 002+01:47:56.322 I 0: [emsesp] Boiler(0x08) -> Me(0x0B), UBAParameterWW(0x33), data: 08 FF 36 00 00 00 00 02 46 00 FF FF ems-esp:$

It's currently set to eco but always displays as hot in the dashboard. Sent from my Galaxy -------- Original message -------- From: Proddy ***@***.***> Date: 04/05/2022 21:50 (GMT+00:00) To: emsesp/EMS-ESP32...

This changes as I toggle the button:- ``` 002+01:49:19.685 N 21: [emsesp] Boiler(0x08) -> All(0x00), UBAMonitorWW(0x34), data: 36 01 13 80 00 80 00 00 01 00 00 D5 DB...

0x13 = eco on 0x14 = eco off

Just checked, it's not offset 11, that stays at 0xFF regardless of ECO on or off Just running a watch to see whether I can see anything toggling

Nothing seems to change from what I can see, so not visible in the usual broadcast packets

Doesn't look as though WB report all the various parameters, for instance, I also can't see the status of the dhw on/off from the programmer when that cycles.

"boiler dwh comfort" is always set to "hot" regardless of the status of the ECO button, likewise wwhyston is always 0.

Nothing sent on a watch when I toggled it, if it's there then I may need to keep reading some of the type values and see what changes there (hence...