Steve2017

That is frustrating. I am now going through the re-configuring with the new board, so I will do all my calibrations (e-steps, flow-rates etc) again. There's a couple of hours...

I have @halfbakery's file installed on my Sonoff Bridge and it seems to work pretty well - but I was still having the issue of rfraw 177 turning itself off....

> you shouldn't need to do this every hour. however you need to do this after every command you send. so if you send a switch command to turn on/off...

This looks like it could be the same problem I have with Riemann sum sensors which become unavailable when a source sensor becomes unavailable for a short period while it...

> since I use the template workaround. It could be - but we shouldn't need a workaround. I am trying to understand your solution because I still don't have a...

I have moved away from using this Riemann Sum sensor because it is unreliable. That rules out using the Enphase integration because it needs Riemann Sum for some data. I...

With a change of address I have had to go back to Riemann Sum for energy sensors and I am still experiencing the problems list above. The child sensor becomes...

I just installed my 4th PC191HA (Arlec smart plug) and it doesn’t show the DPs for current, power and voltage, The previous three plugs (installed months ago) work fine. The...

> Here's an example that you can cut and paste - all you need to do is change gw11000c to your Ecowitt device (and remove / add any other rain...

It appears that this "repair" simply deletes all historic data. I tried one repair on daily rain rate and where I used to have years of data, I now have...