StephanJoubert

@mrp-yt , I would say that the most probable cause would be an incorrect IP address, or a dynamic IP. To check , see if you can connect to port...

@HeartandHana I found an integration for Omnik that used the older protocol, but from what I can see the modbus registers are hard-coded so it may work for the inverter,...

@mrp-yt @piposant from the firmware versions it seems as if it should work. Could you post he inverter make and model and the configuration you are using? @mrp-yt , the...

@piposant , From what I can see that is the hybrid inverter that this integration used as starting point. This is the default, so to test, just remove the line...

@paqp , it is correct to leave the inverter_mb_slave out. The documentation on github is a little ahead of the releases and we will make a new release soon. With...

@pepelillo , this is something I really want myself, but have not been able to do yet. Certainly on the list of todos.

Hi @felipebraz , I know what you are talking about, the information is scattered over the forums, and I eventually realized that much of it came from the mobile app...

The tests you did look very promising. What I would do is to create a small python app to just issue raw requests with the solarman protocol, and then see...

Re the parameters and it's meaning: I got these from the solarman pro app, specifically the resource file DYRealTime.txt. There are other files mapping register values, but I cannot verify....

@evandrobubiak , I think there is a high probability that the micro inverters would be treated as "string inverter", You can try the component with the lookup_file set as deye_string.yaml...