StefanBruens

- [ ] How many channels do you use? - [ ] What are the duty levels of the other channels? - [ ] Does it only happen with 5000,...

Can you please clarify the second answer?

no videos, please. Just describe, step by step, what you are doing, and what results you have, e.g.: 1. I set PWM to 4999 -> ~50% output 2. set to...

What do you mean by flicker? A single flash? Or constant flickering? Are you using the compat mode? If yes, then lower your PWM period to ~2500, 100 Hz is...

Do you use a selfbuilt board or something from the shelf? Can you please provide schematics/part numbers of the MOSFETs/board photos? I can not reproduce it, and am suspecting a...

Hi Uwe, I am completely aware of the calculations, and also the fact that the phase mirroring extends the pulse length when crossing the 50% setting. At a PWM frequency...

Now set your 5 channels to 12, 24, 36, 48, 60 ticks duty, and measure the duty of the fifth channel, it will be well beyond 60 ticks ...

Thanks for the praise, let me return it - finally, a well done bug report ... As the PWM is done in software, there is always the possibility for some...

Please clarify your question.

25kHz is 1/25000 seconds, i.e. 40 microseconds or 40000 nanoseconds. Thus the correct period for 25kHz is: period * ticktime = 40000 => period = 40000 / 200 = 200