Solakila
Solakila
Greetings again, please see the attached. https://drive.proton.me/urls/0Q74SWPRV4#4arulw0pA5bc
I just tried again with this variable change. During the calibration, it looked to go down to only a few hundred but as soon as the calibration eneded, it went...
Yes, if I do manual control and set the bar to 0, it will work
I've just tried again and this now looks like a bit of an overcorrection. It is now idling around 400RPM for a bit when the toggle is switched off but...
Some clarification. I've just taken apart and reassembled some of the PC. The HX1500i is plugged directly into the motherboard, not the Commander. I have also been doing some further...
Thank you for your clarification. What can I do from here to help troubleshoot further as I can still hear the fans audibly drop once closing FanControl so it still...
I've just tried to manually set it to 0RPM and it will not go down to read 0. I recalibrated and also tried editing the calibration for 0% and 1%...
During the sensor settings setup page, I currently have Motherboard, CPU, GPU, Embedded ec (Only ASUS), NVAPI, Nvidia 0%, and CorsairLink enabled. Is this correct? Should I have PSU and...
Just tried again and even with this build, it still will not go down to 0 when setting it as such manually.
Odd one with this build. I tried again and loaded up and recalibrated. It sat around the usual~300 and then eventually went down to 0. I then closed and reopened...