Snocksman

I have the same Issue with SyncWatch on my Amstrad CPC 464. If SyncWatch is enabled, the Picture jumps from time to time and in special Display resolutions it only...

I found a sollution which is working for me. I disable the Syncwatcher, after GBS Control has found and tuned to a stable picture once. if (ignoreLength != GBS::SP_H_PULSE_IGNOR::read()) {...

I have five of this Controllers, too. I tried to use the rgbw setting for them but this didn´t really work. With the rgbw setting I´m able to change the...

Applying this to your GBS Control is very simple. Open the Code in Arduino IDE and search for the Code "block" mentioned in the post (searching for "if (ignoreLength !="...

OK, I got the Board running. But I have a Problem with the Colors and Picture Stability on my Upscaler. Here is the picture how it looks like on my...

For further Information (Oszilloscope Pictures and so on) you can see my thread on forum64: [Link](https://www.forum64.de/index.php?thread/135873-little-sixteen-board-c16-plus4-starthilfe/&postID=1984549#post1984549)

In the cable I use there is a 325 Ohm Resistor in the Chroma connection. I was able to get a good picture using the trimmers, but the picture is...

OK, i´ll have a look at Kicad. So I have something to do at the weekend... ;D When I got the BOM ready, you can add it to this cool...

Hi ! I have found most of the Components, but for some i need a few more informations/values (maybe an example part): CT1 D12 EM3, EM4, EM5 FB2, FB3, FB4,......

Thank you for your answers ! Three questions are left: I found these here at rs-online.com: DSS1NB32A271Q91A This should be a better equivalent for the Filters found on the original...