Snapmaker2-Controller
Snapmaker2-Controller copied to clipboard
Snapmaker
Snapmaker2-Controller is the firmware for Snapmaker 2.0 3-in-1 3D Printers.
I usually try to do my bed leveling with my bed at least at printing temp to get more accurate values as to consider expansion / contraction of the bed....
Is anyone else having a problem with a moving the module after upgrading to v14.1 or v14.2 ? After upgrading to v14.1 > system restarts, but none of the axis...
Having to restart loses the whole setup which might be the best place to start the process of adjusting the run. The SM should pause the current position of the...
G26 Mesh Validation Pattern is designed to be used in conjunction with mesh-based leveling to test the accuracy of the probed mesh. It's currently off in Snapmaker2-Controller. This is a...
The Snapmaker 2.0 is using a proprietary method of encoding thumbnails into G-code. There is a standard method of encoding thumbnails into G-code that all slicers, aside from Luban, use....
I will do several tests attempting to send the same file with settings slightly adjusted. Right now, when sending the files via WiFi, the time stamp is a different UTC...
FEATURE: provide REST (or similar) API and WebHook for printer function, states and urgent messages.
In the spirit of https://github.com/Snapmaker/Snapmaker2-Controller/issues/197 having the requirements provide by an underlying REST API and Webhook would: 1) provide flexibility to a broader range of scenarios and developers (e.g. app...
Given all the issues I and many others continue have with first layers could SM please move to using UBL instead of ABL as: 1. it allows the use of...
When the Snapmaker 2.0 detects the filament runout by the sensor going open could it send a message out the serial port so Octoprint could detect it? If it sent...
