Skorpi08
Skorpi08
it has optical endstops as shown on this website. http://donsthings.blogspot.com/2016/06/k40-optical-endstops.html?m=1 I can test it later with DLC32.
  The Problem is not the Endstop. I have also changed the endstop and another TinyBee Board, don't help. I have changed on X Axis limit_neg_pin: gpio.33 to limit_neg_pin:...
tested with DLC32, no Problem.  board: MKS-DLC32 V2.1 name: K40 Laser with Adapter meta: (10.07.2022) by Skorpi kinematics: Cartesian: stepping: engine: I2S_STATIC idle_ms: 0 pulse_us: 4 dir_delay_us: 1 disable_delay_us:...
Nothing helps. With pin 33 it does not work, with pin 22 it works fine. Something must have changed in the 3.5.0, because with the 3.4.4 it also works with...
[MSG:INFO: FluidNC EventQueueTest] [MSG:INFO: Compiled with ESP32 SDK:v4.4.1-1-gb8050b365e] [MSG:INFO: Local filesystem type is SPIFFS] [MSG:INFO: Configuration file:TinyBee_Adapter.yaml] [MSG:INFO: Machine K40 Laser with Adapter] [MSG:INFO: Board MKS TinyBee V1.0_001] [MSG:INFO: I2SO...
$HX Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1). Core 1 register dump: PC : 0x400825ee PS : 0x00050335 A0 : 0x40085d60 A1 : 0x3ffbf23c A2 :...
https://github.com/bdring/FluidNC/releases/tag/EventQueue2-Test [MSG:INFO: FluidNC EventQueue2-Test] [MSG:INFO: Compiled with ESP32 SDK:v4.4.1-1-gb8050b365e] [MSG:INFO: Local filesystem type is SPIFFS] [MSG:INFO: Configuration file:TinyBee_Adapter.yaml] [MSG:INFO: Machine K40 Laser with Adapter] [MSG:INFO: Board MKS TinyBee V1.0_001] [MSG:INFO:...
thx Mitch!
Ich hab am 01.09.22 ganz sicher keine Config veröffentlicht! Wenn schon, denn nimm meine "offizielle" Config und trag da deine Steps ein. Aber hey, wenn du DER Winterscheidt bist, dann...
wie erwähnt, nimm meine config und ändere nur die Steps. oder hats ein wichtigen Grund warum du I2S_STREAM nimmst?