Simba185
Simba185
Is there a change list for RC3? I am always hopeful but can never seem to pinpoint the issue. Thanks.
So, still the same issue with RC3. Attached is the log and screenshot. [LOG00001.TXT](https://github.com/iNavFlight/inav/files/13445804/LOG00001.TXT)  I would appreciate any ideas to help debug or resolve. Thanks.
@mmosca Arm is set with CH5. But LED is set for ch 22 (I am only using 8ch RX so this is never used), and i cannot see why it...
@mmosca, The Futaba T8J ( all channels) is set for NOR mode that holds that last value under fail-safe conditions. I am almost tempted to just power off the TX...
@sensei-hacker, Yes I have LED set for CH22 (but this is just a dummy mode to enable the LED), The RX I have only supports 8ch. Thanks!
@mmosca is there any way to enable some kind of debug mode that could log errors from the FC or INAV? I want to solve the issue but I'm not...
@sensei-hacker No the Led's turn off then back on after the "glitch" recovers. Attached is a picture of the modes.  According to the log, it seems like the RCOUT...
@MrD-RC In that picture the Arm modes are not shown. Attached is the arm modes, you can see the arm and pre-arm are not enabled at all times. ( only...
Ok so I will remove angle + PosHold ( Could that cause this issue?) Yes parachute goes grey when RC link is restored. this Unit was pretty much unflyable with...
@b14ckyy Yes this is still occuring. I have lots of logs showing the random crash or w/e is happening. Is there any messages in INAV like ardupilot? I currently fly...