Daniel10

@Fra085 To my understanding @matthewlloyd does not continue development for this firmware as he does not own a Prusa Mini anymore. I will try and port the llama firmware to...

Did you store settings to EEPROM ?

I've noticed the same problem with mine. I did the skew test print, logged in the values the spreadsheet gave me and afterwards the results remained the same. @matthewlloyd Is...

Thank you for replying that quickly. Regarding the slicer's start G-CODE: ``` `M862.3 P "[printer_model]" ; printer model check G90 ; use absolute coordinates M92 E415 M83 ; extruder relative...

I've verified with I=0.2 that the probe does indeed run off of the bed, which is why probing fails. I'm now trying with 0.1 again. So it's safe to say...

Hi, I've printed the skew correction print with 0.1 for XY skew and it did not change a thing. I'll try the other two hints tommorrow, that are great ideas....

Hi, I've recently tried setting the skew correction again AFTER bed leveling in the printer's start GCODE. However, there seems to be some calculation error as a minor correction of...