ShuzzDE

Removed Floating point math

4

I modified the portions of the code using float math. Rewriting it to use (unsigned) longs instead makes the resulting binary around 500 Bytes smaller. While this may not seem...

This will allow to only set individual channels by using the raw command. Channel that are supposed to remain unchanged must be sent with the value -1. Please note that...

Add a configuration option for inverting the PWM signals to the GUI.

1

Many simple FET driver circuits require low-active driving. For example, simply adding a small NPN and two resistors per channel to your original schematic would allow the IRLZ44N FETs to...

Feature: Store pre-defined color sequences for easy reference

6

I'd love to be able to do the following: - POST a sequence of fade commands for storage in SPIFF under a unique name for later execution. - POST some...

Feature/control individual raw channels

1

This basically wraps up two changes in the way this library works without breaking backwards compatibility (badly). First off, for HSV commands, the Library will only change the channels relevant...

Contains single line fix that makes CW and WW channels behave nicely in RGBWWCW mode.

Hi! Would you software also work with modern, wayland-based distributions? Thanks! =)