Shendo
Ok, I see. I'm trying to figure out if those cards require the 7V line. Can you try writing to them on the PS3?
The usual problem with 3rd party Memory Cards, especially older ones is that they use 5V flash memory instead of the 3.3V one. Back in the day that memory was...
To be honest I haven't tried PS3 MCA on Mac myself but the interface is there and operational. In theory you need to install libusb library on the Mac and...
It should transfer as the normal save inside a Memory Card image. Unless mega has difficulties communicating with PocketStation (which would be no surprise as PocketStation is difficult to talk...
If you can read it fine then make a backup of the saves and you are free to try experimenting. Uno should be able to write to PocketStation normally. Post...
While the driver name for the libusb installed by Zadig is WinUSB it is using a cross platform libusb library under the hood. LibUSBK seems to be windows only driver...
I have some good news for you. UsbDevice in LibUsbDotNet can be [forced to use libusb backend](https://libusbdotnet.sourceforge.net/V2/html/2de7cff8-17d0-4b61-b7a8-c6cb34d20906.htm) instead of WinUsb. I built this version of MemcardRex to use it. I...
This is my understanding of the matter: WinUSB - Windows only USB drivers. LibUSB - Cross platform open source USB library (Linux, macOS, etc.). LibUSB-win32 - Windows port of LibUSB....
Have you tried to build the image with any other software and have it launch correctly? Personally I build the image for SCPH 9002 and it booted the UPX PadTest...
Memory is a little fuzzy since I only did it once as a test run but it's possible I used -fastload too.