Hilmi Sönmez

The use of an SD card extension is more of a matter of luck. I had no problems with the SKR Mini E3 V2. The board V3 is rather bitchy....

> Be sure to enable `NO_SD_DETECT` when using an SD extender: > > ```c++ > // Enable if SD detect is rendered useless (e.g., by using an SD extender) >...

@thisiskeithb "and you have to mount/unmount the SD card manually through the menu or via gcode" doesn't work. If the SD card was not inserted when switching on, a subsequent...

Insert SD card in extender . Unplug extender on board , plug extender , try this . Hantick Fullstack dev ***@***.***> schrieb am Mi., 10. Aug. 2022, 17:50: > Weird...

> Do you have the cables connected correctly? Send connection photos I had the same problem with an Ender 3 (Non Pro). The firmware on GitHub BTT is not working...

> can you comment on this line? //#define Z_AFTER_HOMING His config file : 

> May I check with you that your post firmware suitable for E3 2.0 on Ender 5 with CR touch? > Thanks and have a nice day. @chenwenhsi Unfortunately I...

@niblem85 pls try this Bugfix Version CR Touch connected at Probe (all 5 cable) , unplug Z-Endstop and let it empty. [firmware.zip](https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/files/8672098/firmware.zip)

x=400 y=400 and z=? Only change bedsize and add BL Touch ?

@plevia precompiled firmware.bin and config files in ZIP Download [Marlin 2.0.9.3](https://github.com/MarlinFirmware/Marlin/archive/2.0.x.zip) and copy files in ZIP.file do edit / change settings Add [M412](https://marlinfw.org/docs/gcode/M412.html) at Start G-Code in Slicer to activate...