Sebastiaan Dammann

I've some [additional input on the use of the COM_PIN](https://github.com/CR6Community/Marlin/issues/32#issuecomment-720735894): > When COM_PIN is set to 0 it turns off reporting of the Z-endstop. To test this, move the hot-end...

@bretterer I'm not sure if you're mentioning me or @thinkyhead but this is a work in progress by Thinkyhead so if you're looking to build it I suggest you start...

This PR is still a work in progress in terms of getting it to compile. I'm not sure what your end goal is, but if you just want Marlin for...

That really depends on the firmware on the probe itself. I think we reversed the CR-6 strain gauge firmware and came to the conclusion that a pin-change interrupt is used...

Which rumors?

I wouldn't know anything about that 😇 Let me know if you have any questions. Also happy to discuss it on Discord if that's easier 👍

@thinkyhead Do you think this is in a testable state yet? Then I'Il give it a go.

I believe these pages are missing that were developed since I first opened the PR: ``` { DGUSLCD_SCREEN_ESTEPS_CALIBRATION, VPList_EstepsCalibration }, { DGUSLCD_SCREEN_PIDTUNE_CALIBRATION, VPList_PidTune }, { DGUSLCD_SCREEN_TUNEFWRETRACT, VPList_FWRetractTune }, { DGUSLCD_SCREEN_ESTEPS_CALIBRATION_RESULTS,...

Possibly helpful: https://github.com/platformio/platformio-core/issues/3927#issuecomment-888465652

Basically Creality is violating the ST license currently, right? Met vriendelijke groet, Sebastiaan Dammann ________________________________ Van: EvilGremlin ***@***.***> Verzonden: Monday, August 8, 2022 12:22:52 PM Aan: MarlinFirmware/Marlin ***@***.***> CC: Sebastiaan...