SeaneyC

This is just how Evohome works isn't it? If you apply a manual override of temp at the Smart valve or the panel it will default at that temp until...

I would be happy with a 3x3 or 4x4 grid design based on 16:9 aspect ratio windows. The “main” box takes up a 2x2 box in a 3x3 grid or...

Getting the same On Sat, 20 Aug 2022 at 15:32, Lucas Gasenzer ***@***.***> wrote: > Okay, I think I got a little further. Can someone check in the Home.app if...

Serial number is populated now, everything still seems to be working in Home app fine. Will update if any issues, many thanks! On Sun, 21 Aug 2022 at 09:22, Lucas...

This must by why I don’t seem to have any issues then, good to know. Thanks On Wed, 24 Aug 2022 at 07:58, Erik Baauw ***@***.***> wrote: > Not exactly...

Do you know what triggered the reset? I’ve dropped power to my rPi a couple of times by accident as it runs off PoE with no real issues recently. On...

+1 for hot water temp viewing and on/off functionality would be great! unable to contribute code as i’m useless but happy to test on a 12 zone system with hot...

I messed about with various combinations of 15, 10, and 5 degree settings with away turned off and on, and wasn’t able to generate any errors like the 2 users...

My bad. I tried with the system in off mode again with the default of 5 degrees and also bumped it to a default minimum of 10 degrees in off...