Sean Jarman

While Tony has been behaving quite well for some time now, the bottom line is that the machine was rushed back into service as Gerald was about to fall over....

I seem to have been copied in on this, probably because I commented previously... It's a simplistic view, but; No individual or group of individuals make any profit from DoESDoes...

Hi all, spent a bit of time on Tony last Thursday and managed (I think) to get the servo lock significantly improved on x, but at the price of it...

We're going to focus efforts on getting Gerald back online then retrofit stepper motors on Tony, arguably a downgrade from the existing servo drives, but they "just work", and as...

A bit baffled by this - I used Tony to do an (almost) A4 sized engrave last thursday without problems. I wonder if the issue is with the software stack,...

If this is for the leadscrews, just about any lubricant that "dries" would work fine - like the ptfe/teflon version of WD40 - GT85?? As long as it does not...

I agree, WD40 for the sliders, or better still one of the PTFE-containing versions like GT85. The slides do need some lubrication every once in a while, but a mostly-dry...

Was referring to repairing the pellet loading chute for the machine - have done this and will bring it in on Thursday. The main cylinder requires cleaning up with a...

I think the nozzle end will unscrew from the rest of the cylinder, will make it easier to unblock if this is the case. From: user8274 To: DoESLiverpool/somebody-should Cc: Sean...

I dropped off the loading chute this evening, it is repaired but a small spring or piece of elastic is required to hold the door closed. Good to see all...