Schroedingers-Cat

On my NAS, attics cache folder is about 15GB (backing up roughly 6TB of data). Is there an option to either switch off cache and what factor would be the...

The main limitation here seems to be OpenAL, which does not support multiple listeners. The proposed workaround, if I understand the part "re-map all active audio source" correctly, is to...

> 2. Adjust the volume via Gizmo Set the min. / max. distance of the audio emitter via scene editor like scaling an object > 5. Audio Areas Define audio...

> We're using a fork of OpenTK and handle this part manually in the platform backend of Duality: The default is the systems native OpenAL, but there's a special case...

> The OpenAL effects can be applied per-audio-source. If we use the native audio sources for the bus channels, it's only possible to set the effect on a bus, not...

> What I meant originally, that if we redirected all listeners to a single native audio source, then we wouldn't get the native effects on each of the emitters. Absolutely!...

> So far, we have identified some general topics to look into regarding bigger / mid- or long term changes in the audio system, most of which exist independently of...

Had the same BSOD as the OP three times in a row while downloading a game from Steam (with a rate of roughly 12MB/s) using WinBtrfs v1.8. The Minidump headers...

@BluedragonMask thanks a lot! Did you also test v1.7.9, v1.7.8, ... down to v1.7.2 and found v1.7.3 to be the first version with this BSOD?

I tried downloading around 150GB of games onto my BTRFS drive via Steam with v1.8.0, v1.7.9 and v1.7.3. This took multiple hours and here's the amount of BSODs I got:...