Scales82

@vitotai How is the ADS1115 wired to the esp8266? Im unfamiliar with them.

Thats an esp32 though isnt it? I assume the wiring is the same but using the appropriate SCL SDA pins on the esp8266? Also read grounding the address pad on...

@sedgington Although I am not familiar with what hardware you are using (I am using a wemos D1 mini). I believe that the wiring method is the same across all...

@sedgington I just re-read your comment. It looks like you arent even getting the BPL to boot, I would suggest the ADS is not the problem and you are flashing...

@sedgington I got a transducer for cheap. it was 1/8NPT though. But I just put a 1/8 to JIC fitting on it to accept a duotight connector and was all...

 @Naesstrom Thats how i got it there... So in left-to-right sequence it is. Sensor. 1/8NPT female to 7/16 JIC. (also known as MFL fitting in homebrew world). Duotight MFL...

I have my BPL boards set up for D0 for spunding, I use thorax's bin to make it work. Should I be concerned by your above comments @vitotai ? Or...

Yeah, as far as I know, its closed-source for now. I was at the Kegland facility last weekend and discussed with the boss about it very briefly. I wouldn't count...

https://www.youtube.com/watch?v=Rg-0JppKOEA This video just popped up. Could this webhook technique on the RAPT portal be possibly tweaked to send to a BPL instead of Brewfather in this instance?

Ok guys, I've had success linking the RAPT pill to BPL. Turns out the portal supports sending the data via webhooks. On all of their devices, not just the Pill!...