SanFable
SanFable
Hello, I had same problem with 1.4 RC versions, I tried different ESPs (32 and 8266) and finally discovered that v1.3.3 is working flawlessly, I'm on WPA3 and esp8266. Summarizing:...
My bad, Thank you for that info, by luck I finally landed on WPA2 for IoT network. I will try to gather logs tomorrow
Hello @Laxilef, I have gathered the logs, I have used esp32 nodemcu, two scenarios, [Esp32WifiConnect_SpecifiedWifiSettings.txt](https://github.com/user-attachments/files/15533513/Esp32WifiConnect_SpecifiedWifiSettings.txt) [Esp32WifiConnect_SpecifiedWifiAndStaticAddressSettings.txt](https://github.com/user-attachments/files/15533511/Esp32WifiConnect_SpecifiedWifiAndStaticAddressSettings.txt) First one is first reboot after flash, Im connecting to AP, debug options are...
@papinist check if you have installed drivers for built usb->serial adapter and you are selecting correct COM device @Laxilef Sorry for late reply, I have tried without success, after that...
@Laxilef LOL, I got it! even I have tried standard 1.4.0 from release section and its working You won't believe... The problem is password forwarding from the form. On my...
@Laxilef Confirming, 1.4.1 successfully connected to my UniFi-IoT network. Thank you very much for fix :) edit, checked WPA3, my ESP32 nodemcu connected successfully too ;)
@Daveblanche Before setup I have went to HA settings ->devices and services->mqtt->devices, selected opentherm and removed it. Then after installing new one I removed and added new cards in dashboard....
@Laxilef @tincanpete I have tested 1.5.1, I have setup it like normal, kept telnet logs enabled, for 20mins I stayed with default settings and warns because boiler low support (just...
@tincanpete try following: download current settings backup reflash whole esp32 using PC (flash factory image and filesystem like new one) when connecting to esp32 for the first time restore settings....
From my side, I had 2 reconnections every 24h using esp32s3. I assume esp32 s3 is powerful enough to handle something bad thats going on in the background. C3 was...