Sascha Sander

It is "okay" to have only one device (the NVR). But the config flow should allow to add multiple channels add once after entering the host data. If having multiple...

If you are using an NVR, the camera is not reachable via an own IP. Only via the channel. Thus you should create a device with a distinct identifier like...

I'd prefer the follwing: If doorbell rings > sip phone call to my phone > use voice channel of sip for communication between doorbell and phone vice versa

I just need to be able to receive and send audio data to the doorbel. You can perform this with the (crappy) eufy security app, thus there must be a...

I have a similar issue. I'm using the bridge with the same firmware version and local API enabled. The local API is based enabled and runs on port 8080 (http)...

For me the problem was solved... It was my fault. I wrote the web api token in the form field of the bridge api token and vice versa.

@frenck how about adding a helper (climate multiplier) allowing to set factors for existing thermostats values min_temp: 5 max_temp: 5 target_temp_step: 1 current_temperature: 5 temperature: 5 ... this example would...

Maybe you could create a dropdown helper and apply the selected effect on change.

I have the same issue... By the way the "current_temperature" attribute on the climate entitiy is "null" but it should contain the current value

I'm having the same problem... The calculation changed in 2022.5 ... I guess we need to discuss this with @frenck since voltage is not calculated the same way as temperature...