measurePSF
measurePSF copied to clipboard
SWC-Advanced-Microscopy
Measure PSF FWHM along different axes
Maybe it `medfilt2` that needs it. If we can not bypass then maybe we can skip and show stuff without filtering. But for sure the recording should all run without...
Image size is changed correctly but does not return to what it was after the acquisition of the data. Maybe other functions also fail in this way.
Currently it turns off four PMTs even if not all exist. So we need to turn off only existing PMTs. Ideally we should record only channels with a PMT attached.
The user must run `recordPSF` with only one channel set for saving. Otherwise analysis of the data fails. This is not enforced right now and it's easy to forget to...
Figure should be completely self-documenting. No extra information should be needed to understand it.
Are the numbers along the side of the PSF line plot correct? They certainly used to be correct, but maybe now they aren't. Double check. Bruno thinks they were out...
In case the user has a weird device, like an ELT, which maybe they don't want to use for this measurement. Could even have a settings file to remember whatever...
Metadata
Owner
Metadata
Measure PSF FWHM along different axes