S5NC
S5NC
The check for a valid GPIO pin for the ESP32-S3, which means any GPIO pin, should be ```cpp #define digitalPinCheck(p) ((0
From the `monero-gui-v0.18.3.3` path, run `./monero-wallet-gui`. Does the icon show up then? For me the icon doesn't show up when using the desktop entry, but shows up when running that...
E22-900M30S works for me and many others, it's likely a problem with your specific wiring.
Does this happen every time the battery dies, or just sometimes?
E32-400M30S and E32-900M30S use the SX1276, will work on firmware for this radio chip, can be tested on [a user's radio module which uses it](https://www.tindie.com/products/caseyhalverson/hamshield-lora-edition-1-watt-440mhz/)
Should wait for an answer to https://github.com/meshtastic/firmware/pull/2930#issuecomment-1796892532 too
For now I will wait untill someone is able to test other EBYTE modules to verify that 22 dBm output from the radio ID is safe, doesn't damage the radio,...
Would also need to add a build job?
It is guaranteed that boards with the E22-900M33S will be damaged by outputting 22 dBm out of the radio IC. Ideally the SX126x should have an integrated EEPROM which limits...
10 dBm ERP is 12.15 dBm EIRP, which form of radiated power are we using? If we assume a 0 dBi antenna, it should be the latter.