Pete

Oh - please ignore the changes to the [FluidNC/src/Spindles/VFDSpindle.h](https://github.com/bdring/FluidNC/pull/457/files#diff-06fa078b01267db857395ecd7c50df2177126d8813fa2765a590c7498d60b938) This does not need to be pulled back into the main repo- it was just set to aid debugging - please...

Thanks Bart, can I remove the VFDSpindle.h from the PR? I'll have a look around but not too sure how to do it

Hey everyone, I've been away on holiday and been moving jobs since - so been hectic. by the looks of it - this got merged? do I need to do...

So my good friend has written a write up on how to configure the VFD drive it self. But looking through the current Devt branch, I cannot see the original...

I've noticed the same issue when it comes to calibrating a rotation axis and the mapping between degrees to `steps_per_mm`. isn't as simple as a 1:# mapping that you'll normally...

Interesting. I was uploading a new configuration each time and resetting the controller between uploads through Fuildterm (I didn't realise you could amend those parameters through the terminal). In my...

Hi All, I have just tested this version on a prototype hardware which uses this sensor and I can confirm the warning messages of "Component tmp102.sensor took a long time...

[SiemensV20About.md](https://github.com/bdring/FluidNC/files/10798121/SiemensV20About.md) Hey Mitch, please see attached - let me know if that is suitable, there is a growing number of us who use the V20 spindle. so it would be...

Where possible I will support it. we have a couple of users over on the Root CNC discord who are using the V20 drive and I have been supporting them....

Hey, please see the latest commit to this repo - [HERE](https://github.com/RootCNC/Root-4-CNC/commit/56f9f0ad2770f859b4f236fa709d6582033cf9ab#diff-0945685166d88441de23ab99ed57f7223f8a67f0a33792032800e73381d42f69) let me know if you have any issues with the part - I'll leave this issue open until I...