Rodrix33333

Wow. Thanks for the super fast reply. So my led strip was made for a nodemcu esp8266, with WLED. The Nodemcu controller was attached to 3 wires. Red (5v), black...

Yes, I have a power supply for the Raspberry Pi. And I also have a power supply for the Leds. The image of the Raspberry Pi of that page does...

I just arrived home and took some photos and uploaded them. This is my setup: https://postimg.cc/MMYLb0J3 The led controller has its own power supply and ends with two cables. One...

Schematics of https://tutorials-raspberrypi.com/connect-control-raspberry-pi-ws2812-rgb-led-strips/ refer to Raspberry Pi 3. This is why I can't follow... I think I have soldered the wrong pins. It would be great if you could confirm...🙏🙏🙏

I am reading and reading to try to find the issue. I read that that GPIO18 has an output of 3.3V and that the Leds work at 5V so I...

I feel so dumb :/... It's just two wires and I can't get it right. I would appreciate some help. I have reviewed everything so many times and I am...

Thanks so much! Now the wiring is much more clear. I will finish debugging the software part and then come back to this ticket, before closing it, and report back....

Success! Thanks so much. This was hard. I was able to run the software and connect the LEDs. Now the leds change color according to the BACKGROUND color setting. However...

Thank you so much for your help! How can you setup Synthesia to do that? What's the name of the configuration or setting? Thanks again On Tue, Oct 11, 2022,...

Some useful information: After running for the first time on ssh, the visualizer file, now it boots everytime without me doing anything. It seems that there is a bug that...