Roberto

I have completed an initial acquisition, but only from the motherboard to the logic analyzer, excluding the RF module. I'm not sure if this will be useful... [traxxas2.sal.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/15108526/traxxas2.sal.zip) What I...

[poweron.logicdata.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/15112248/poweron.logicdata.zip)

> * power on in bind mode with a RX in bind mode [binding.logicdata.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/15112353/binding.logicdata.zip) > * power on, CH1 mid, min, mid, max, mid [ch1.logicdata.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/15112354/ch1.logicdata.zip) > * power on, CH2...

> CH1H:CH1L: channel 1 value 042D..05C6..0733 -> looks like PPM values with a center on 5DC=1500 but the low part being truncated to 1069 and high part 1843. Any end...

Wow! Congratulations on the speed! Unfortunately, it seems that the receiver does not detect the radio.

 

> Please try again, stupid mistake... At least I 've found one... Same problem, the receiver don't detect the radio

Same situation, tonight i will do some other test and some videos

Note the time between turning on the radio and when the receiver "accept" the commands, maybe there is something? https://www.youtube.com/watch?v=JomC5fWWWbc

I have done another acquisition, maybe can be useful... > * power on not touching anything [poweron.logicdata.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/15172351/poweron.logicdata.zip) > * power on, CH1 mid, min, mid, max, mid [ch1.logicdata.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/15172350/ch1.logicdata.zip)