Roberto
Roberto
Tested `Arduino_32u4_Code` ~~replacing line 63 with `Keyboard.begin(KeyboardLayout_it_IT);`~~ Result: characters ok: `,.-;:_@#[]\|` characters empy: `{}` ~~`` was replaced by `\` and `|`~~ ~~fixed editing file `Documents/Arduino/libraries/Keyboard/src/KeyboardLayout_it_IT.cpp`~~ ~~change 0x32 with 0x35 and...
Autopsy starts by setting `jdkhome=/Library/Java/JavaVirtualMachines/openjdk/Contents/Home/` (Java 21 by brew) in `/Users/Roberto/autopsy-install/autopsy-4.21.0` but the guide suggests using java 17
Using `yay` and `hstr`: ```shell $ yay -S hstr :: There are 2 providers available for hstr: :: Repository AUR 1) hstr 2) hstr-git Enter a number (default=1): :: Checking...
Just wanted to say thanks for writing: > Please note that 100000(SBUS) and 420000(CRSF) are non-standart baud rates which may not be supported by some USB-to-serial adapters. FDTI and CH340...
Same "issue," I can't update from version 13 to 14 using OTA; I have to flash it using a serial connection. Perhaps the page https://github.com/scottrbailey/WLED-Utils/blob/gh-pages/sp511e_wled.md could be updated to include...
Same issue, found build instruction in `.appveyor.yml` I used this: ```shell git clone [email protected]:pgaskin/kobo-mods.git cd kobo-mods git submodule update --init --recursive docker run --rm --volume="$PWD:/src" --workdir="/src/kobo-dotfile-hack" --entrypoint=make ghcr.io/pgaskin/nickeltc:1.0 docker run...
Disassembly:            # Receiver SR3001:  ...
> You would need to connect wires to the 5 vias within circle + gnd: I don't think that i can solder a cable in this small vias :( Any...
> I'd desolder that RF lid and grab some pictures of what is underneath Can't desolder, but i found this: https://fccid.io/XVE-SA09181/External-Photos/Modular-Pictures-1202329