RobLeighton67

Have the same issue, suggested that a malformed conf file could cause the issue (more strict verification in 2.0.12) but a carefully checked conf did the same.. Rollback is the...

2.0.12 starts/works on buster for Pi Zero if you install the buster1 version of the libwebsockets18 package rather than the (later, obvs) buster2 version...

[missing action button press.txt](https://github.com/Koenkk/zigbee2mqtt/files/13307771/missing.action.button.press.txt) From the debug log it can be seen that the device sends a Zone Status of 9 (setting bit 3 for battery low) - I suspect...

Used the referenced converter and all working fine after addition, but the device is very spammy - Zigbee msg every 5s or so - I can debounce it in Z2M...

I'm receiving the same error during pairing with a CC2652P coordinator - Sonoff P (firmware 240315) . Pi Zero - z2m 1.40.0 latest build. Device seems to working OK.

Frient is the B2C company, Develco Products is the B2B White label company - same people, met most of them! On Tue, 10 Sep 2024, 19:41 Haraade, ***@***.***> wrote: >...

Just to add, it's occurred with every version I have used - 2.0.11, 2.0.12. 2.0.18 - whether installed through APT or built on the device.

Sorry for the slow response, I was away. I have persistence disabled, cleansession is false, bridge_insecure is false, Otherwise just standard bridge configuration stuff, pretty simple.

Almost like the timer has gone weird. On Wed, 13 Nov 2024, 15:58 ggrote, ***@***.***> wrote: > I've got the same problem since a few versions, all clients keep getting...

Yeah, I've pretty much ruled out the time-adjustment idea - as you can see from my attached log the recorded timestamps are contiguous, no weird gap or recession. Also the...