PB

skipped first layer of different color on multimaterial, then prints in mid air, then below the previous layer ('no sparse layers' enabled)

2

### Description of the bug I make a simple STL file to test MMU filament change:  On PS 2.6.0 alpha3 (0.4mm layer height with 0.6 nozzle), first layer of...

### OrcaSlicer Version 1.8.1 ### OS version Ubuntu 23.10 ### Printer Original Prusa i3 MK3S+ MMU2S ### How to reproduce Enable Make Overhang Printable (introduced by https://github.com/SoftFever/OrcaSlicer/pull/1615) on the attached...

Option to disable/enable MMU3 on MK3, mk2 printers on Prusa-Link/Connect

5

With FW 3.13.0 and MMU FW 3.0.0, an option to disable/enable the MMU2 was implemented in MK3 firmware and menu (see https://github.com/prusa3d/Prusa-Firmware/issues/1876#issuecomment-1658145989). This option or, at least, the viewing of...

Can not pad a rectangle sketch : "Cannot compute Inventor representation for the shape" and pocket acts as pad

3

### Is there an existing issue for this? - [X] I have searched the existing issues ### Problem description I added a rectangle sketch to YZ plane of cutter-y body...

printing in mid-air if multimaterial is selected

3

### Description of the bug If I paint an overhang face, prusaslicer wants to print in mid-air. if single-color is selected, it prints ok. Painting:  mid-air (2 colors): ...

[toolchanger] [Prusa XL] M104.1 is useless (for now)

8

### OrcaSlicer Version 2.2.0 nightly ### Operating System (OS) Linux ### OS Version Ubuntu 24.04 LTS ### Printer Original Prusa XL 5T ### Expected results M104.1 is NOT yet implemented...

### Is there an existing issue for this feature request? - [X] I have searched the existing issues ### Is your feature request related to a problem? OrcaSlicer does not...

[FEATURE REQUEST] XL - nextruder buttons functionality - should extrude/retract filament when not printing

3

### Printer model XL ### Describe the feature I would like that the nextruder buttons have some functionality (beside emitting light) : extrude filament. - If the temperature is ok...

[BUG] Phase Stepping Calibration is worse in 6.4.0 than 6.2.6 (Prusa XL)

18

### Printer model Prusa XL 5T ### Firmware version 6.4.0 alpha ### Upgrades and modifications _No response_ ### Printing from... USB ### Describe the bug Phase Stepping Calibration results are...

[BUG] Prusa XL skipped steps on the extruder motor after ramming should not trigger "extruder motor is not spinning"

2

### Printer model Prusa XL ### Firmware version 6.2.6 ### Describe the bug The Prusa XL firmware repeatedly crashes during the same print job at a consistent layer height, triggering...