Rin Cat (鈴猫)

You guys can give it a try.

Not enough logs, unknown element are expected.

Try set `echo 5 > /proc/net/rtl88x2bu/log_level` and check logs. You may wanna try iwd as mentioned.

What's your WiFi model and configuration? The driver think the WiFi beacon frame is invalid.

Maybe try change both to 802.11n/ac , the router send beacons said the size is 80, but size only 26. It could be bug in the router.

> @brisback did you have any luck? I'm in the same situation now... Have you checked the README yet?

Hi, I got different results: `iw list | grep MHz` > * 5720 MHz [144] (disabled) > * 5745 MHz [149] (30.0 dBm) > * 5765 MHz [153] (30.0 dBm)...

I just noticed you are on ARM, so I cannot test that. But you can set the `CONFIG_RTW_LOG_LEVEL` to 5 and see if something wrong.

Yes, there is no "00" in the driver built-in country channel data. Which it usually let wireless-regdb/crda to control which channel can be used.

I Added this support, but notice it is not use the CRDA/wireless-db data. https://github.com/RinCat/RTL88x2BU-Linux-Driver/commit/3a6f393adda93ab0bc8998c8efc9cb8e438e04b4